archive-si.com » SI » H » HANNASERVICE.SI

Total: 314

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".
  • COD Meters - Hanna Instruments Slovenija
    phone or e mail HANNA BLOG Check advices from experts and useful information on our blog HANNA BLOG Latest article on the blog Measuring pH in shampoo Twitter Share on Tumblr Published 18 December 2015 Shampoo is a hair care product used for removal of dirt dandruff skin particles oils and other contaminated particles As the scientists behind hair care progressed manufacturers synthesized chemical additives for use in shampoo as fragrance foaming agents and colored dyes Shampoo is now created and structured towards various hair types as well as to achieve a certain end result such as the reduction of dandruff or greasy hair Both the synthetic and natural ingredients used in a shampoo dictate the pH of that particular product The pH of a shampoo will alter the natural pH of skin and hair which ideally falls between pH 3 and 5 and pH 4 and 5 respectively thereby affecting their physical and chemical makeup Read more COD Meters Twitter Share on Tumblr HI 83214 COD Meter and Multiparameter Photometer for Wastewater Analysis HI 83224 COD and Multiparameter Photometer with Bar HI 83099 COD and Multiparameter Bench Photometer Contacts Hanna Service d o o Ulica 15 Maja 19a 6000

    Original URL path: http://hannaservice.si/en/cod-eng/10-english/208-category-cod-meters (2016-04-28)
    Open archived version from archive


  • COD Reagents - Hanna Instruments Slovenija
    on the blog Measuring pH in shampoo Twitter Share on Tumblr Published 18 December 2015 Shampoo is a hair care product used for removal of dirt dandruff skin particles oils and other contaminated particles As the scientists behind hair care progressed manufacturers synthesized chemical additives for use in shampoo as fragrance foaming agents and colored dyes Shampoo is now created and structured towards various hair types as well as to achieve a certain end result such as the reduction of dandruff or greasy hair Both the synthetic and natural ingredients used in a shampoo dictate the pH of that particular product The pH of a shampoo will alter the natural pH of skin and hair which ideally falls between pH 3 and 5 and pH 4 and 5 respectively thereby affecting their physical and chemical makeup Read more COD Reagents Twitter Share on Tumblr HI 93754A 25 COD Reagents Low Range EPA HI 93754B 25 COD Reagents Medium Range EPA HI 93754C 25 COD Reagents High Range EPA HI 93754D 25 COD Reagents Low Range Mercury Free HI 93754E 25 COD Reagents Medium Range Mercury Free HI 93754F 25 COD Reagents Low Range ISO HI 93754G 25 COD Reagents Medium

    Original URL path: http://hannaservice.si/en/cod-eng/10-english/209-category-cod-reagents (2016-04-28)
    Open archived version from archive

  • COD Meter Accessories - Hanna Instruments Slovenija
    advices from experts and useful information on our blog HANNA BLOG Latest article on the blog Measuring pH in shampoo Twitter Share on Tumblr Published 18 December 2015 Shampoo is a hair care product used for removal of dirt dandruff skin particles oils and other contaminated particles As the scientists behind hair care progressed manufacturers synthesized chemical additives for use in shampoo as fragrance foaming agents and colored dyes Shampoo is now created and structured towards various hair types as well as to achieve a certain end result such as the reduction of dandruff or greasy hair Both the synthetic and natural ingredients used in a shampoo dictate the pH of that particular product The pH of a shampoo will alter the natural pH of skin and hair which ideally falls between pH 3 and 5 and pH 4 and 5 respectively thereby affecting their physical and chemical makeup Read more COD Meter Accessories Twitter Share on Tumblr HI 731318 Cuvette Cleaning Cloth HI 839800 COD Test Tube Heater with 25 Vial Capacity HI 740216 Test Tube Cooling Rack HI 740217 Lab Safety Shield HI 740219 COD Test Tube Adapter HI 740220 Glass Cylinder Set 25 mL Contacts Hanna Service

    Original URL path: http://hannaservice.si/en/cod-eng/10-english/207-category-cod-meter-accessories (2016-04-28)
    Open archived version from archive

  • Pripomočki- KPK - Hanna Instruments Slovenija
    advices from experts and useful information on our blog HANNA BLOG Latest article on the blog Measuring pH in shampoo Twitter Share on Tumblr Published 18 December 2015 Shampoo is a hair care product used for removal of dirt dandruff skin particles oils and other contaminated particles As the scientists behind hair care progressed manufacturers synthesized chemical additives for use in shampoo as fragrance foaming agents and colored dyes Shampoo is now created and structured towards various hair types as well as to achieve a certain end result such as the reduction of dandruff or greasy hair Both the synthetic and natural ingredients used in a shampoo dictate the pH of that particular product The pH of a shampoo will alter the natural pH of skin and hair which ideally falls between pH 3 and 5 and pH 4 and 5 respectively thereby affecting their physical and chemical makeup Read more Pripomočki KPK Twitter Share on Tumblr HI 731318 Cuvette Cleaning Cloth HI 839800 COD Test Tube Heater with 25 Vial Capacity HI 740216 Test Tube Cooling Rack HI 740217 Lab Safety Shield HI 740219 COD Test Tube Adapter HI 740220 Glass Cylinder Set 25 mL Contacts Hanna Service d

    Original URL path: http://hannaservice.si/en/cod-eng/8-slovensko/177-podkategorija-cod-meter-accessories (2016-04-28)
    Open archived version from archive

  • Turbidity - Hanna Instruments Slovenija
    It has been found that there is a strong correlation between the turbidity level and the BOD value Moreover by definition turbidity obstructs light thus reducing the growth of marine plants eggs and larvae which are usually found in the lower levels of an aquatic ecosystem Wastewater Treatment an Turbidity Historically turbidity is one of the main parameters monitored in wastewater In fact the monitoring and treatment process was once solely based on the control of turbidity Currently the measurement of turbidity at the end of the wastewater treatment process is necessary to verify that the values are within regulatory standards Generally speaking the turbidity value has to be between 0 and 50 FTU with an accuracy of 3 FTU depending on the phase of the wastewater treatment process By monitoring the turbidity level it can be determined if the different stages of the process particularly in the filtration and purification stages have been completed correctly The HANN A Solution There are three analytical test methods for turbidity ISO 7027 Water Quality Determination of Turbidity US EPA Method No 180 1 Turbidity and Standard Methods No 2130B The USEPA and Standard Methods recommend a particular wavelength in the visible range of the spectrum and the European system requiring an infrared light source ISO 7027 In order to satisfy these different requirements HANNA has developed products that meet both standards The Infrared Method ISO 7027 HI 88713 and HI 98713 operate by passing a beam of infrared light through a vial containing the sample to be tested The light source is a High Emission Infrared LED A sensor positioned at 90 with respect to the direction of the light detects the amount of light scattered by the undissolved particles present in the sample A microprocessor converts these readings into FTU FNU values The USEPA Environmental Protection Agency Approved Method Instruments featuring EPA approved methods are designed to meet or exceed the criteria specified by the USEPA Method 180 1 and Standard Method 2130 B Turbidity Bench Meters Principal of Operation The USEPA Method 180 1 specify the key parameters for the optical system to measure turbidity for drinking saline and surface water in a 0 to 40 NTU range using the nephelometric method HI 83414 and HI 88703 are designed to meet or exceed the criteria specified by the USEPA Method 180 1 and Standard Method 2130 B The light beam that passes through the sample is scattered in all directions The intensity and pattern of the scattered light is affected by many variables such as wavelength of the incident light particle size and shape refractive index and color The optical system includes a tungsten filament lamp a scattered light detector 90 and a transmitted light detector 180 In the ratio turbidimeter range the microprocessor of the instrument calculates the NTU value from the signals that reach the two detectors by using an effective algorithm This algorithm corrects and compensates for interferences of color making the HI 83414 and HI 88703

    Original URL path: http://hannaservice.si/en/turbidity/10-english/227-turbidity-2 (2016-04-28)
    Open archived version from archive

  • Benchtop Turbidity Meters - Hanna Instruments Slovenija
    phone or e mail HANNA BLOG Check advices from experts and useful information on our blog HANNA BLOG Latest article on the blog Measuring pH in shampoo Twitter Share on Tumblr Published 18 December 2015 Shampoo is a hair care product used for removal of dirt dandruff skin particles oils and other contaminated particles As the scientists behind hair care progressed manufacturers synthesized chemical additives for use in shampoo as fragrance foaming agents and colored dyes Shampoo is now created and structured towards various hair types as well as to achieve a certain end result such as the reduction of dandruff or greasy hair Both the synthetic and natural ingredients used in a shampoo dictate the pH of that particular product The pH of a shampoo will alter the natural pH of skin and hair which ideally falls between pH 3 and 5 and pH 4 and 5 respectively thereby affecting their physical and chemical makeup Read more Benchtop Turbidity Meters Twitter Share on Tumblr HI 88703 Precision Turbidity Benchtop Meter EPA Compliant HI 88713 Turbidity Benchtop Meter ISO HI 83414 Turbidity and Free Total Chlorine Benchtop Meter EPA Compliant Contacts Hanna Service d o o Ulica 15 Maja 19a

    Original URL path: http://hannaservice.si/en/turbidity/10-english/305-benchtop-turbidity-meters (2016-04-28)
    Open archived version from archive

  • PortableTurbidity Meters - Hanna Instruments Slovenija
    Twitter Share on Tumblr Published 18 December 2015 Shampoo is a hair care product used for removal of dirt dandruff skin particles oils and other contaminated particles As the scientists behind hair care progressed manufacturers synthesized chemical additives for use in shampoo as fragrance foaming agents and colored dyes Shampoo is now created and structured towards various hair types as well as to achieve a certain end result such as the reduction of dandruff or greasy hair Both the synthetic and natural ingredients used in a shampoo dictate the pH of that particular product The pH of a shampoo will alter the natural pH of skin and hair which ideally falls between pH 3 and 5 and pH 4 and 5 respectively thereby affecting their physical and chemical makeup Read more PortableTurbidity Meters Twitter Share on Tumblr HI 93703 Portable Logging Turbidity Meter ISO Compliant HI 83749 Portable Turbidity Meter and Bentonite Monitoring HI 847492 Haze Meter for Beer Quality Analysis ASBC Standards HI 93414 Turbidity and Free Total Cl 2 Portable Meter with CAL CHECK and Fast Tracker HI 98703 Turbidity Meter with Fast Tracker Technology EPA Compliant HI 98713 Portable Turbidity Meter with Fast Tracker Technology ISO HI

    Original URL path: http://hannaservice.si/en/turbidity/10-english/306-category-portableturbidity-meters (2016-04-28)
    Open archived version from archive

  • Turbidity Meter Reagents - Hanna Instruments Slovenija
    hair care progressed manufacturers synthesized chemical additives for use in shampoo as fragrance foaming agents and colored dyes Shampoo is now created and structured towards various hair types as well as to achieve a certain end result such as the reduction of dandruff or greasy hair Both the synthetic and natural ingredients used in a shampoo dictate the pH of that particular product The pH of a shampoo will alter the natural pH of skin and hair which ideally falls between pH 3 and 5 and pH 4 and 5 respectively thereby affecting their physical and chemical makeup Read more Turbidity Meter Reagents Twitter Share on Tumblr HI 83749 11 Turbidity Calibration Kit HI 83749 20 Bentocheck Solution HI 88703 11 Calibration set for turbidimeter HI 88713 11 Calibration set for turbidimeter HI 93102 0 AMCO AEPA 1 Calibration Solution at 0 NTU HI 93102 20 AMCO AEPA 1 Calibration Solution at 20 NTU HI 93124 0 Standard Solution 0 EBC HI 93124 1 Standard Solution 2 5 EBC HI 93124 2 Standard Solution 125 EBC HI 93124 03 Turbidity USEPA 180 1 Method HI 93414 11 CAL CHECK Calibration set Free and Total Cl 2 HI 93703 0 AMCO

    Original URL path: http://hannaservice.si/en/turbidity/10-english/307-category-turbidity-meter-reagents (2016-04-28)
    Open archived version from archive